Sintering Furnace 1000º C Mbf60-10 Type Medium-Temperature Clean Box Furnace Melting Furnace

• Customization: Available
• Certification: ISO
• Place Style: Vertical
• Model NO.: MBF60-10
• Range of Applications: Industrial
• Type: Electric Holding Furnace
• Usage: Ceramic Sintering
• Fuel: Electric
• Atmosphere: Air
• Effective Chamber Dimensions: 350*300*550mm(W*H*D)
• Transport Package: Wooden Packaging
• Specification: 860*1750*1220mm
• Trademark: Chitherm
• Origin: China
• HS Code: 8514101000
• Production Capacity: 50 Sets/Year

Product Description

Equipment Name and Model: MBF60-10 Type Medium-Temperature Clean Box Furnace

 Application Fields:

Mainly used for high-temperature heat treatment processes of similar products such as electronic devices and electronic ceramics.

Technical Specifications and Basic Configuration

3.1 Rated Temperature: 900°C;
3.2 Maximum Temperature: 1000°C;
3.3 Inner Lining Material: Fused Quartz;
3.4 Effective Dimensions: 350 ×300 × 550mm (W × H × D);
3.5 Heating Rate: ≤10°C/min;
3.6 Heating Elements: FEC ceramic fiber heating plates, heating from all four sides;
3.7 Temperature Stability: ±1°C, with PID parameter self-tuning function;
3.8 Temperature Uniformity: ±5°C (tested with an empty furnace at constant temperature of 900°C);
3.9 Thermocouple Type: K-type;
3.10 Number of Temperature Control Points: 1 point;
3.11 Number of Temperature Control Segments: 9 segments;
3.12 Exhaust Chimney: Equipped with an exhaust port at the rear, which can be manually adjusted;
3.13 Inlet Design: Allows the introduction of dry, clean, oil-free compressed air or oxygen into the furnace chamber, with the inlet flow controlled by a glass rotameter, measuring range 10-100LPM;
3.14 Alarm Protection: Over-temperature, open circuit, etc., with audible and visual alarm protection, and over-temperature alarm power-off protection function;
3.15 Maximum Heating Power: 16 kW;
3.16 Typical Insulation Power for an Empty Furnace: ≤8 kW;
3.17 Surface Temperature Rise: <35°C;
3.18 Equipment Weight: Approximately 400 Kg;
3.19 Equipment Exterior Color: Light Grey;
3.20 Reference External Dimensions: 860 × 1750 × 1220mm (W × H × D).

 

Delivery List
	Item	Note	QTY
Basic Compositions	Furnace		1 PC
	Certificates of Inspection	Furnace and major purchased components	1 Set
	Technical Documents	Furnace specifications, technical documents of major purchased components, etc	1 Set
Key Parts	FEC Heater		1 Set
	Temperature Controller		1 PC
	quartz glass		1 Set
Spares	SSR		1 PC

 Facility Requirements
1. Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
2. Process air conditions: clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 3 - 6m³ /h.
3. Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 10m³ /h;
4. Ground requirements: level, no obvious vibration, bearing capacity > 250Kg/m² .
5. Power conditions: capacity greater than 22kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
6. Installation site: 1800mm×1850mm×3000mm (W×H×D), installation area greater than 3.5m².