Hrf512-07 Hot Air Decarburisation Furnace, 800× 800× 800mm (w*h*d) , Stainless Steel Heater

• Customization: Available
• Certification: ISO
• Place Style: Vertical
• Model NO.: Hrf512-07
• Range of Applications: Industrial
• Type: Electric Holding Furnace
• Usage: Ceramic Drying
• Fuel: Electric
• Atmosphere: Nitrogen
• Effective Chamber Dimensions: 800*800*800mm(W*H*D)
• Thermocouple Type: K Type
• Transport Package: Wooden Packaging
• Specification: 1500*1930*2000mm(W*H*D)
• Trademark: Chitherm
• Origin: China
• HS Code: 8514101000
• Production Capacity: 50 Sets/Year

Product Description

1. Applications:
 

Powder materials, magnetic materials, ceramics, glass, metals, plastics, and post-3D printing drying, curing, debinding, tempering, annealing, aging, preheating, and age hardening.



2. Mainly Specifics:

1. Rated Temp.: 650ºC
2. Max Temp.: 700ºC
3. Effective Dimensions: 800 × 800 × 800mm(W×H×D)
4. Heating Method: Stainless Steel Heater.
5. Process Atmosphere: Air.
6. Temperature Control Stability: ±1ºC.
7. Temperature Uniformity: better than ±5ºC (insulation 1 hour at 650ºC test).
8. Thermocouple: Type K.
9. Temperature control points: 1
10. Temperature measurement points: 1 point.
11. Process Steps: 4 × 16 steps.
12. Exhaust: One exhaust port on top,DN50,The exhaust vent size can be manually adjusted.
13. Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection
14. Max Heating Power: 36kW.
15. Heating rate: ≤5°C/min (operable at 1°C/min).
16. Insulation Power: ≤ 18kW.
17. Surface Temperature Rise: ≤ 35ºC.
18. Weight: about 1200kg.
19. Furnace Dimensions: about 1500×1930×2000mm (W×H×D,No chimney included).
20. Appearance Color: light gray.

 

3. Delivery List
	Item	Note	QTY
Basic Compositions	Dryer		1 PC
	Certificates of Inspection	Dryer and major purchased components	1 Set
	Technical Documents	Manual instructions, technical documents of major purchased components, etc	1 Set
Key Parts	Stainless Steel Heater		1 Set
	Temperature Controller		2 Set
	Touch Screen		1 Set
	circulating fan
Spares	SSR		1 PC
	Stainless Steel Heater		1 Set
	Seal gasket		2 Set

4. Facility Requirements
4.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
4.2 Inlet water conditions: Clean and non-corrosive, water temperature ≤ 23 °C, inlet pressure 0.2-0.4 MPa, flow rate approximately 2-6 L/min.
4.3 Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 15m³ /h;
4.4 Ground requirements: level, no obvious vibration, bearing capacity >300Kg/m² .
4.5 Power conditions: capacity greater than 50kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
4.6 Installation site: 2000mm×3000mm×3000mm (W×H×D), installation area greater than 6m².