900º C Mbf60-10 Melting Furnace Labratory Furnace Electric Furnace

• Customization: Available
• Certification: ISO
• Place Style: Vertical
• Model NO.: MBF60-10
• Range of Applications: Industrial
• Type: Electric Holding Furnace
• Usage: Ceramic Sintering
• Fuel: Electric
• Atmosphere: Air/O2
• Effective Chamber Dimensions: 350*300*550mm(W*H*D)
• Heating Method: Fec Heater
• Transport Package: Wooden Packaging
• Specification: 860*1750*1220mm
• Trademark: Chitherm
• Origin: China
• HS Code: 8514101000
• Production Capacity: 50 Sets/Year

Product Description

 Application Fields:

Mainly used for high-temperature heat treatment processes of similar products such as electronic devices and electronic ceramics.
The use of FEC (Fiberglass Epoxy Composite) ceramic fiber heating plates provides resistance to acids and alkalis, excellent uniformity, and simple operation. It is suitable for use in various laboratories and small batch production processes.

Technical Specifications and Basic Configuration

1. Rated Temperature: 900°C;
2. Maximum Temperature: 1000°C;
3. Inner Lining Material: Fused Quartz;
4. Effective Dimensions: 350 ×300 × 550mm (W × H × D);
5. Heating Rate: ≤10°C/min;
6. Heating Elements: FEC ceramic fiber heating plates, heating from all four sides;
7. Temperature Stability: ±1°C, with PID parameter self-tuning function;
8. Temperature Uniformity: ±5°C (tested with an empty furnace at constant temperature of 900°C);
9. Thermocouple Type: K-type;
10. Number of Temperature Control Points: 1 point;
11. Number of Temperature Control Segments: 9 segments;
12. Exhaust Chimney: Equipped with an exhaust port at the rear, which can be manually adjusted;
13. Inlet Design: Allows the introduction of dry, clean, oil-free compressed air or oxygen into the furnace chamber, with the inlet flow controlled by a glass rotameter, measuring range 10-100LPM;
14. Alarm Protection: Over-temperature, open circuit, etc., with audible and visual alarm protection, and over-temperature alarm power-off protection function;
15. Maximum Heating Power: 16 kW;
16 .Typical Insulation Power for an Empty Furnace: ≤8 kW;
17 .Surface Temperature Rise: <35°C;
 

 

Delivery List
	Item	Note	QTY
Basic Compositions	Furnace		1 PC
	Certificates of Inspection	Furnace and major purchased components	1 Set
	Technical Documents	Furnace specifications, technical documents of major purchased components, etc	1 Set
Key Parts	FEC Heater		1 Set
	Temperature Controller		1 PC
	quartz glass		1 Set
Spares	SSR		1 PC

 Facility Requirements
1. Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
2. Process air conditions: clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 3 - 6m³ /h.
3. Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 10m³ /h;
4. Ground requirements: level, no obvious vibration, bearing capacity > 250Kg/m² .
5. Power conditions: capacity greater than 22kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
6. Installation site: 1800mm×1850mm×3000mm (W×H×D), installation area greater than 3.5m².